Open post
Greenwich Design District Buildings C1 and D1 Full View

Greenwich Design District – Buildings C1 and D1, London

Greenwich Design District - Buildings C1 and D1, London


Bringing the Inside Out.

Greenwich Design District Buildings C1 and D1 Full View

Locker Architectural were sub-contracted by Ardmore Construction to design, supply and install over 2,000m2 of Rope Diamond Ferruled mesh for use at Greenwich Design District. The project was hailed as a great success and featured on the cover of Architects Journal.

Greenwich Design District Buildings C1 and D1 45 Degrees View

Specified by Architecture 00, buildings C1 and D1 fully utilise the unparalleled flexibility of this mesh for façade cladding, balustrading, bird netting and forming a state of the art rooftop Multi-use games area.

Greenwich Design District Buildings C1 and D1 Inside Netting

The transparency of the mesh is intended to strip back to the most basic of building components, while affording tenants with a truly impressive view of the surroundings.  The stairs and lifts are also on the exterior of the building, truly connecting the interior and exterior of the buildings.

 

 

Greenwich Design District Buildings C1 and D1 Inside View

Thanks to Taran Wilkhu the photographer for photos 1 – 4, and Greenwich Design District for commissioning them.

Greenwich Design District Buildings C1 and D1 Full View of Netting
Greenwich Design District Buildings C1 and D1 Front and Side
Greenwich Design District Buildings C1 and D1 Close Up View
Greenwich Design District Buildings C1 and D1 Side View
Open post
Viking SP Metal Mesh

Viking SP Mesh

Viking SP Mesh


Specification

Material
Self colour / galvanised / Stainless Steel
Mesh Aperture 9mm-58mm subject to application and loadings
Bars 25-70mm / 2-3mm thick
subject to application and loadings
Edge Up to 70x3mm or suitable kick plate (riser)
to stair tread / landings if required.

Viking SP Mesh: printable specification sheet with 1:1 scale image.

Availability

Available in self colour, galvanised or Stainless Steel.

Typical Applications

Horizontal screening, walkways, stair treads (pedestrian and maintenance use), balustrading and façades.

Locker is a UK based supplier of architectural wire mesh products certified to BS EN ISO 9001:2015 and Achilles 'Building Confidence' Level 4.

With comprehensive in house 3D design facilities we are able to offer a complete package from development of the architectural wire mesh specification through design, fabrication, supply and installation of the finished screens.

Open post
riffle-top-looped-wedge-wire-spec

Riffle Top Looped Architectural Wedge Wire

Riffle Top Looped Architectural Wedge Wire


Riffle Top Looped Architectural Wedge Wire

Specification

Wedge Wire Material 316, 316L and 304 Stainless Steel
Width (w) 3.0 mm
Height (h) 19 mm
Angle (a) 12°
Aperture 3.28 mm
Support Rod* 7.7 mm
Framing As required subject to application

*Please note: The information provided is indicative. Expert advice should always be sought in specifying the correct product for your application.

Riffle Top Looped Architectural Wedge Wire: printable specification sheet with 1:1 scale image

Wedge Wire Cross Section

Typical Applications

Balustrade infill panels, air distribution and drainage grilles, floor grilles, fountain grilles, ceiling grilles and bespoke applications.

Locker is a UK based supplier of architectural wire mesh products certified to BS EN ISO 9001:2015 and Achilles 'Building Confidence' Level 4.

With comprehensive in house 3D design facilities we are able to offer a complete package from development of the architectural wire mesh specification through design, fabrication, supply and installation of the finished screens.

Open post
seine-wedge-wire-

Seine Architectural Wedge Wire

Seine Architectural Wedge Wire


Seine Architectural Wedge Wire

Specification

Wedge Wire Material 316, 316L and 304 Stainless Steel
Width (w) 2.5 mm
Height (h) 4.5 mm
Angle (a) 10°
Aperture Range from 1.5mm to 12mm subject to requirements.
Support Rod* Variable, subject to application
Framing As required subject to application

*Please note: The information provided is indicative. Expert advice should always be sought in specifying the correct product for your application.

Seine Architectural Wedge Wire: printable specification sheet with 1:1 scale image

Wedge Wire Cross Section

Typical Applications

Balustrade infill panels, façades, air distribution and drainage grilles, floor and stair grilles, fountain grilles, ceiling grilles and bespoke applications.

Locker is a UK based supplier of architectural wire mesh products certified to BS EN ISO 9001:2015 and Achilles 'Building Confidence' Level 4.

With comprehensive in house 3D design facilities we are able to offer a complete package from development of the architectural wire mesh specification through design, fabrication, supply and installation of the finished screens.

Open post
moselle-wedge-wire

Moselle Architectural Wedge Wire

Moselle Architectural Wedge Wire


Moselle Architectural Wedge Wire

Specification

Wedge Wire Material 316, 316L and 304 Stainless Steel
Width (w) 2.3 mm
Height (h) 3.3 mm
Angle (a) 13°
Aperture Range from 1.5mm to 12mm subject to requirements
Support Rod* Variable, subject to application
Framing As required subject to application

*Please note: The information provided is indicative. Expert advice should always be sought in specifying the correct product for your application.

Moselle Architectural Wedge Wire: printable specification sheet with 1:1 scale image

Wedge Wire Cross Section

Typical Applications

Balustrade infill panels, façades, air distribution and drainage grilles, floor grilles, fountain grilles, ceiling grilles and bespoke applications.

Locker is a UK based supplier of architectural wire mesh products certified to BS EN ISO 9001:2015 and Achilles 'Building Confidence' Level 4.

With comprehensive in house 3D design facilities we are able to offer a complete package from development of the architectural wire mesh specification through design, fabrication, supply and installation of the finished screens.

Open post
loire-wedge-wire-spec

Loire Architectural Wedge Wire

Loire Architectural Wedge Wire


Loire Architectural Wedge Wire

Specification

Wedge Wire Material 316, 316L and 304 Stainless Steel
Width (w) 5.0 mm
Height (h) 6.0 mm
Angle (a) 20°
Aperture Range from 1.5mm to 12mm subject to requirements
Support Rod* Variable, subject to application
Framing As required subject to application

*Please note: The information provided is indicative. Expert advice should always be sought in specifying the correct product for your application.

Loire Architectural Wedge Wire: printable specification sheet with 1:1 scale image

Wedge Wire Cross Section

Typical Applications

Balustrade infill panels, façades, air distribution and drainage grilles, floor and stair grilles, fountain grilles, ceiling grilles, solar shading and bespoke applications which include seating and street furniture.

Locker is a UK based supplier of architectural wire mesh products certified to BS EN ISO 9001:2015 and Achilles 'Building Confidence' Level 4.

With comprehensive in house 3D design facilities we are able to offer a complete package from development of the architectural wire mesh specification through design, fabrication, supply and installation of the finished screens.

Open post
rhone-wedge-wire

Rhone Architectural Wedge Wire

Rhone Architectural Wedge Wire


Rhone Architectural Wedge Wire

Specification

Wedge Wire Material 316, 316L and 304 Stainless Steel
Width (w) 3.4 mm
Height (h) 7.4 mm
Angle (a) 10°
Aperture Range from 1.5mm to 12mm subject to requirements. (5mm minimum recommended for stilletto heel guard)
Support Rod* Variable, subject to application
Framing As required subject to application

*Please note: The information provided is indicative. Expert advice should always be sought in specifying the correct product for your application.

Rhone Architectural Wedge Wire: printable specification sheet with 1:1 scale image

Wedge Wire Cross Section

Typical Applications

Balustrade infill panels, façades, air distribution and drainage grilles, floor and stair grilles, fountain grilles, ceiling grilles, solar shading and bespoke applications which include seating and street furniture.

Locker is a UK based supplier of architectural wire mesh products certified to BS EN ISO 9001:2015 and Achilles 'Building Confidence' Level 4.

With comprehensive in house 3D design facilities we are able to offer a complete package from development of the architectural wire mesh specification through design, fabrication, supply and installation of the finished screens.

Scroll to top